Crafts from coffee beans topiary. Making a coffee tree at home. Bronzing coffee topiary

Doing something beautiful with your own hands is a natural need for literally every woman. Not one MK (master class) has been reviewed, and more than one MK she could have given herself. For novice craftswomen, coffee topiary can become one of the most fertile topics. These are souvenir trees made from coffee beans, sometimes with the addition of ribbons, simple in execution, but very beautiful and fragrant. After looking through the photo gallery, you will see that making such a miracle with your own hands is certainly not difficult. The composition can always be supplemented with flowers, ribbons, braid, beads. And if you decide to make a money tree, a souvenir dollar will come in handy, and sometimes a real dollar.

It is better to learn from something simple and universal, so that when you are thinking about complicating the product, the instructions will be clear to you. Simple coffee topiary is almost always the same master class that explains the work progress step by step.

So, to make such a coffee tree, you will need:

• Directly coffee beans;
• Glue (ideally a glue gun)
• Ball base;
• Barrel stick;
• Gypsum or alabaster;
• Water;
• Paints, brush;
• Paper napkins;
• Flower pot;
• Decor at your discretion.

MK begins with the fact that you prepare the base ball. It's good if you already have a foam blank, and you don't have to make it on purpose. But if there is none, then take a newspaper, make a lump out of it, and tie it with threads to make a ball.

In order not to fiddle with newspapers, you can take a simple small children's ball - quite a basis for yourself. But if you took the ball, then do not wait, then the grains will be taken on the glue directly onto the rubber. Therefore, you will need paper napkins with which the ball is tightly pasted over. Remember the old MK, how papier-mâché was made in childhood, and so, the principle is the same - glue, paper, many layers and good drying.

Such a ball covered with napkins dries for about an hour and a half. During this time, select the beans from which you will make the crown of the coffee tree.

How to make coffee topiary with your own hands: step by step instructions

When the ball is dry, you need to paint over it. The ideal color is brown, under the coffee beans. This must be done so that the whole story does not look like "hack" because of the treacherous gaps. It would be nice if the paint was acrylic.

Do-it-yourself coffee tree step by step:

• The base is laid on the glue in two layers. By the way, about the glue. Do not be too sophisticated, ordinary PVA glue will quite cope with this task. Silicate glue has not been used in manual art for a long time, and a more powerful glue can make the process irreversible. Because PVA glue, period.
• Divide the grains into two parts... Those that are worse and smaller will go to the bottom layer. And of the most beautiful, you need to make an elegant top layer. Use a glue gun to glue the grains tightly to each other so that there are no gaps.
• When the crown is ready, you can make a trunk... Wrap the stick for the barrel with a satin ribbon, preferably in a pastel shade. Or light chocolate or golden. Each MK recommends its own barrel decor. Look at a few photos of which coffee tree seems more interesting to you, and then copy the decor of the trunk.
• The pot can also be decorated with a ribbon, but if you need a more complex story, you can draw inspiration from the same photos. You can even make a coffee cup into a pot for a tree, decorating the top layer in the cup with grains, golden sparkles with coins with your own hands. Sometimes the same souvenir dollar (or maybe not a souvenir one) is put in the base of the tree, which means that it is already a money tree. The trunk is installed in gypsum or alabaster, poured into a pot.

Sometimes grains and poppies are combined. An interesting combination is obtained when coffee beans imitate poppy seeds. The poppies themselves are made from red fabric. Both in the photo and in reality, such coffee topiary looks very convincing: bright beautiful flowers and coffee aroma. And at the base of such a topiary, you can also put the same dollar.

DIY coffee topiary (video master class)

Topiary from coffee and twine, photo

Topiary made from twine and coffee beans is also popular. In this case, you need to make a flower from the twine, the core of which will be coffee grains.

MK for making a flower from twine:

• Take a regular cardboard paper tray. You need the protruding parts, from which the base of the flower will be. Cut off this bulge, make the twine wrapping, tight enough.
• The twine is easiest to fix on a thermal gun. Set aside the resulting "nuts".
• Further, the master class involves the creation of flowers. Cut the twine into pieces. To make one flower, you need five large petals and four small ones. The petals are connected with hot melt glue. Then they are glued to the base, first large and then small.
• In the middle of the second row of petals, this MK offers gluing coffee beans.
• The flower is planted in the prepared "nut" and so sticks to the crown. The gaps are closed by fixing the coffee beans.

This, of course, is not the only twine topiary master class. You can do it in another way, and sometimes twine is simply wrapped around the trunk of a tree. You can see other decor options in the photo. Don't forget the same symbolic dollar at the bottom.

Topiary in the shape of a heart from coffee beans (video master class)

Topiary made of coffee and satin ribbons

You can create a beautiful wedding topiary with your own hands from satin ribbons and coffee grains. Such a tree can have one crown, that is, one flower from the ribbons. But more often master classes offer a whole inflorescence, from three to ten flowers, which will decorate a wedding table, for example.

How many flowers to make, decide for yourself, look in the photo gallery, which option seems more attractive to you.

If we talk about mini MK, then the flower is very simple:

• The core is based on large coffee beans;
• Ribbon petals frame these seeds;
• Everything is fixed with a glue gun;
• As a base ball, you can use a small Christmas ball (it is he who is "loved" in this case, master classes on this topic).

You can build just a flower from ribbons, or you can attach leaves from the same years at the base of the flower. Bridal topiary is delicate, soft colors, so a set of cream ribbons will come in handy for you.

Such an original topiary as a coffee gentleman is also popular. And you can easily make it with your own hands, because in fact it is the same tree - only with handles, and in a hat. The handles are made from wire, which is pasted over using the papier-mâché method. This process is not quick, but there is nothing complicated. You need to do so that the gentleman can bend his arms and fingers.

It's great if such a coffee citizen has an elegant top hat on his head and a flower in his hand. Take a look at the photo: the options for their decor may be different. A hat from the same ribbons, or a flower from ribbons. More interesting is the master class, which suggests taking the dollar as the basis for the hat and flower.

A gentleman really turns out to be more personable if a dollar flaunts on his top hat, and even a dollar in his hand in the form of a flower. By the way, make a flower with your own hands following the origami pattern. You can also find a photo instruction, where other options for a flower are presented, based on a dollar or other souvenir currency.

Such a coffee gentleman, by the way, is also a great wedding gift. And the same dollar, or rather, an envelope with such bills, only real, such a tree can hold with his own hands.

Topiary "steaming cup of coffee" (video master class)

Topiary is a beautiful gift, an original sign of attention to those who love coffee and cannot resist everything associated with this noble and aromatic drink. Successful work and good fortune to your tree, may it bring good luck!

Topiary from coffee (photo)

Fans of unusual things have long appreciated the coffee topiary that came from the East. It is easy to use the materials at hand. The main thing is to find a source of inspiration. You can do this by walking down the street, looking through thematic catalogs, or simply by listening carefully to yourself. The key to success will be pedantry and confident hand movements.

It all began many centuries ago in garden design, when people learned to figuratively change the shape of bushes and trees. With the spread of classicism in Europe, gardening traditions have become the norm in many countries. In the middle of the 19th century in China, for the first time, they began to use a well-known technology to create a tree that was not similar to any existing species.

The history of this unusual decorative art goes back almost two hundred years. National schools have been formed in each country. Exhibitions are held annually, where craftsmen demonstrate their skills.

DIY coffee topiary: numerous types

It is enough to look at the numerous photos to literally lose the power of speech from the flight of the imagination of the masters. Each of the presented topiary has a unique shape, color, geometry and style. Depending on the occasion, social status and age of the recipient, you can choose one of the creative projects for implementation:

Designers distinguish the following types of compositions:

• For kids;
• For decoration of premises;
• Gift;
• Anniversary;
• Cash;
• With modified geometry (for example, "").

Do-it-yourself topiary "coffee tree": photos and tips from the masters

It is difficult for a beginner to overcome fear before starting work. That is why step-by-step instructions in the form of photographs must be in front of your eyes. The first few songs will seem daunting, but it will get easier over time.

To help beginners, designers have developed several guidelines:

• If more than 1 layer of grains is applied, then the first is always fastened with a strip down, and the second - with a strip up;
• PVA glue or "hot glue" is used;
• It's better to start with a sketch - this will help determine the amount and type of materials needed;
• It is necessary to maintain a balance - excessively bulky compositions are not stable.

Topiary from coffee "gentleman": a gift for a real man

Finding a memorable and unconventional gift is not easy, so sooner or later people come to the idea of ​​doing everything on their own. It's easy to make the upcoming birthday of your boss, brother, husband or groom unforgettable. This will require 3-4 hours of free time.

Even if the master is not familiar with the tastes and preferences of the hero of the occasion, such a gift will have to go to the court.

More ideas for creating a topiary for a man can be found in the article: n

You can create coffee splendor as follows:

• Buy a blank ball in a handicraft store;
• Purchase 250-300 grams of aromatic coffee beans;
• Fix the grains in 2 layers on the surface of the ball with a glue gun;
• Glue the hat to the ball;
• Paste over the curved wire with a dark twine;
• Put the ball on the wire;
• The pot where the composition is placed is decorated depending on the preferences of the culprit.

Making coffee topiary with flowers

Floral motifs have always been popular for their versatility. Poppies, roses, wildflowers and bouquets all create a cozy atmosphere in the room. You can create a composition with flowers at home.

How to make a topiary with your own hands - tips for beginners:

Most often, flowers are made using satin ribbons or corrugated paper. Polymer clay is also used, from which flowers are extremely beautiful.

The flower arrangement is usually fastened from one side, from the top in the center, or the flowers are distributed evenly throughout the topiary.

Minimalist coffee and twine topiary

Designers have learned to use objects around them in various creative projects. For example, a mug is part of the topiary or its basis. Depending on preferences, everyone chooses an option for themselves. It is not difficult to create an unusual piece of jewelry or a gift. The main thing is to decide in advance on the preferred execution option. Fans of vintage style will appreciate the simple, but very effective composition.

It is created from a mug, twine and small decorative elements:

• The handle of the cup is wrapped with twine in several layers, fixed with a glue gun;
• The same is repeated with the body of the water tank;
• The coffee beans are applied at the bottom of the mug, where the thickness of the twine or twine is greatest;
• Grains are applied strictly in 1 layer;
• The composition is completed by a vintage bow attached to the handle of the mug.

Unusual coffee topiary: photo with a cup

Many have seen unusual handmade gifts, but everyone decided to make something similar with a cup. In addition to the method described above, it is not difficult to create a flying composition at home. For work, you will need a cup, saucer, strong wire or cutlery, coffee beans and decorative items, depending on aesthetic preferences.

The further procedure is as follows:

• A piece of wire is bent on both sides by 3-4 cm using pliers;
• The lower part of the saucer, where the base of the composition is attached, is covered with protective plastic;
• The same is repeated with the outer rim of the cup;
• The air structure is fixed using Moment glue or hot melt glue;
• The base is wrapped in several layers with twine and fixed with glue;
• The coffee beans are applied to the base in several layers;
• Optionally, the saucers are decorated with pebbles, tinsel, beads or just coffee beans.

A wedding is one of the most memorable events in the life of every person. That is why they are looking for gifts and decorative items for her the longest.

You can make a good wedding present yourself. This will require natural coffee beans, 2 pieces of strong wire, glue, decorative materials and a little imagination.

A wedding is a harmonious union of two people, therefore, it is this idea that the designers propose to implement:

• With the help of pliers, both wires are bent in an arbitrary way;
• Take 2 balls, each of which personifies the image of the bride and groom;
• In the first case, 2 layers of glued grains are decorated with a mini-bow, and in the second, with a cylinder;
• The curved wire leading to the lady's ball is decorated with pink fabrics or threads, and the gentleman gets a dark version;
• Colored fabrics, beads, coins or colored stones are used to decorate the pot.

3 more ideas for wedding topiary can be found in the material:

Making poppies topiary with coffee: master class

Master classes come to the aid of novice masters, telling in detail how to create a floral masterpiece. Poppies will help to decorate a living room decorated in a classic style. A seemingly laborious composition is created in a few hours. The main thing is to be calm and focused.

• Black threads;
• Coffee beans;
• Gypsum;
• Small balls of green or small balls for topiary;
• Several decorative items to choose from;
• Scissors;
• Decorative grass;
• Crepe paper;
• Hot glue.

Rubber balls are cut into two equal parts, which are stuffed with padding polyester. After that, both halves are trimmed with a fabric that matches the color of the coffee beans. Then the grains are applied in two layers using a glue gun.

To create the petals, you need a strong wire that runs through the bases in the form of balls. Once it has gone through, it is aligned in the shape of petals with pliers.

To make the petals, you need maroon paper, cut into small pieces. After that, one of the previously cut balls is pierced with a strong wire and fixed with glue. As soon as the workpiece has dried, the top half of the cut ball is pasted over with red petals.

You will learn how to make an unusual organza topiary in this material:

Topiary "dollar" from coffee: making a gift for the chef

Finding a good gift is not so easy, so for many it becomes obvious the need to make it with your own hands. When it comes to the birthday of an executive or business partner, it is better to choose a composition in the form of a dollar sign. Even if there are no significant reasons on the nose, the money tree will complement the interior of the room.

In order to make a coffee dollar you need the following:

• A piece of thick cardboard on which a dollar sign is drawn;
• A piece of steel wire bent in the shape of a sign;
• Fasten the curved wire onto a piece of cardboard;
• Cut out a currency sign similar in its parameters from cardboard and cover the first part;
• Wrap the workpiece with a jute rope;
• Pierce the workpiece in the middle with two parallel pieces of wire and wrap them with a jute bundle;
• Fix with a glue gun on the grain blank (the first layer is installed with a strip down, and the second with a strip up)
• Fix the product to the base.

Airy topiary made of coffee and satin ribbons - a delicate DIY gift

Floral motifs are the most common element in living room decoration. They found their reflection in unusual compositions made of satin ribbons. Depending on the selected flower, the appropriate color of the material is selected. For example, to create a sunflower, you need pieces of ribbons of a golden or slightly beige color.

Butterflies or ladybugs act as additional decorative elements.

For work, you will need the following materials:

• Glue gun;
• Stick as a base;
• PVA glue;
• Aromatic coffee beans;
• Gypsum;
• DVD or CD disc;
• Beads of a suitable color;
• 1 candle;
• Scissors;
• 3 types of satin ribbons;
• Clay pot.

The only difference from the above described mechanism of operation is associated with the design of the decorative part. To begin with, pieces of satin 5 cm wide are cut.For a full-fledged composition, you will need about 40 pieces. They are folded in half and one of the edges is trimmed neatly. Then the 2 ends of the folded ribbon are glued together in the middle. Next, pieces of colored tape are attached to the CD with a glue gun.

Topiary from coffee beans (video)

Topiary made from coffee beans is a stylish decoration for a bedroom, living room or office space. This unusual craft will become a memorable gift for loved ones. It's easy to do it yourself. This will take several hours and a little imagination. The initial sketch is made on paper, and then the necessary materials are selected on its basis.

Topiary from coffee (photo)

Topiary made from coffee beans are spectacular accessories that you can give or use to decorate your own home. It is easy to give the product the shape of a ball, flower or heart, experiment with accessories and stands. Topiary from coffee beans can be miniature or very large, reaching 1 meter in height.

Coffee crafts: what they are

You can decorate any home-made products with roasted coffee beans: mini-flavors for the car and the house, paintings and panels, figurines and toys. But they are especially often used to make topiary, which are often called trees of happiness. These cute crafts easily fit into any interior and not only decorate the room, but also flavor it, spreading the invigorating scent of freshly brewed coffee around.

Their shiny surface will make the wood look even more beautiful, and the top-grade grain has a subtle and long-lasting aroma. It is important to strengthen the topiary made from coffee beans so that it does not tip over. Use ceramic vases, clay or plastic pots, and wooden pots as a stand. They can be covered with fabric, dyed, decorated with beads or rhinestones, decorated with sticks or floral mesh. An original stand for coffee beans topiary will be earthenware mugs, cups, milk jugs or sugar bowls.

A master class on making crafts from coffee beans can be found in specialized publications for the interior or in glossy women's magazines. Various videos are devoted to making topiary, explaining in detail all the subtleties of creating trees of happiness.

Topiary from coffee (video)

Classic balls for home and office

It imitates the crown of a real tree, trimmed in a French park style. In a pot or vase, you can place one tree or create a whole composition of 2-3 trunks. It is important to maintain a balance, the crown in the form of a ball should not be too heavy so that the structure does not overturn. If you do not understand what a real tree of happiness should look like, watch the master class in the video, where everything is explained in great detail.

To create a classic round topiary you will need:

• round floral sponge for dried flowers;
• stationery knife;
• artificial stem or slightly curved thick branch;
• plastic or clay pot;
• small twigs for decoration;
• rope;
• star anise, cinnamon, cloves;
• roasted coffee beans;
• brown silk ribbon;
• polymer glue;
• gypsum or alabaster.

Find the right size for your floral round sponge. It has a perfectly flat surface, is lightweight and very easy to use. At the bottom with a clerical knife, cut a hole corresponding to the volume of the branch or trunk. Coat the workpiece with polymer glue and firmly attach the grains with the grooves down. In the next row, glue the grains in strips up, alternating them with clove buds. Attach a few star anise stars on top. Spices will not only make the tree more beautiful, but also add new notes to the fragrant bouquet.

Buff the branch with sandpaper to make it perfectly smooth, then trim to the desired length. An artificial trunk bought in the salon does not need additional finishing. If desired, it can be painted with acrylic paint. Coat the top end of the trunk with glue and reinforce the crown. It must be well fixed in order for the tree to be stable.

Dilute alabaster or gypsum with water and pour into the prepared pot. Place the barrel in it and hold until the alabaster hardens. Coat the surface of the wood with glue and line with the coffee beans, grooves up. Place a couple of cinnamon sticks and an anise star on top.

Cut thin twigs into small even pieces and cover the pot with them. Wrap the rope over them. Finally, tie a brown silk ribbon around the base of the opening and tie it with a bow. Based on the creation of the tree of happiness, you can make a master class by recording it on video.

Heart-shaped topiary (video)

Heart with coffee aroma: simple and romantic

The heart of coffee beans looks very impressive. It is better to make such a thing small, a bulky design will lose its charm. The base-heart can be made from crumpled paper, cut out of foam. There are ready-made floristic bases on sale that are very easy to work with. To make a do-it-yourself topiary from coffee beans, purchase in advance:

• a vase or pot for the base;
• alabaster or gypsum;
• newsprint;
• polymer glue;
• dark brown acrylic or watercolor paint;
• thick wire;
• dark brown woolen threads;
• roasted coffee beans;
• silk ribbons;
• beads for decoration.

Crumple the newsprint and shape it into a heart by wrapping the threads around the structure. Cover the product with polymer glue and leave to dry. Then paint it with acrylics so that the base does not show through under the coffee beans. Let the workpiece dry. At the bottom of the heart, make a hole for the attachment.

Cut a piece of wire to the desired length. Wrap it tightly with brown woolen threads and secure with a drop of glue. Place glue on the paper base and attach the coffee beans to it, positioning them as tightly as possible. They can be glued in one or two layers. After drying the heart blank, fix it on a wire coated with glue. If it does not hold tightly enough, you can fix the paper heart with brown plasticine, hiding the attachment point under a silk ribbon tied with a bow.

Pour the diluted alabaster into a pot, place a wire support in it and hold until the mixture is completely solid. Cover the surface with coffee beans, strengthening them with drops of glue.

Topiary heart can be decorated with silk ribbon rosettes or a cute bow at the base of the trunk. Rhinestones or artificial pearls look very impressive. Place them on top of the coffee beans in random order. Interesting ideas for decorating trees of happiness can be gleaned from numerous videos, where authors share their best finds. Attend a thematic master class, it will become a source of inspiration for your own creativity.

Making a topiary with your own hands is very interesting. Having mastered the basic skills, you can conduct your own master class, where you will reveal your secrets and show off elegant crafts. Record a detailed video, it will help novice craftswomen in their work.

Coffee topiary can be a wonderful gift, decoration of a dining table or home interior. After all, it is so fragrant, beautiful, environmentally friendly and also very easy to manufacture. In this material you will find a basic workshop on making coffee topiary with your own hands for beginners and 50 photo ideas for inspiration.

10 ideas

Idea. 1. Classic topiary

The classic coffee topiary is round, without any special decorations, composed only of natural materials and in neutral colors. Such a tree looks simple, but, perhaps, more elegant than others. At the end of the article, you will find a step-by-step master class on making just this type of topiary.

Idea 2. Flower tree

A coffee tree with flowers blooming on it is a great idea for a woman's gift, for example, on March 8 or, say, Teacher's Day. It also looks good in a bedroom or living room.

Idea 3. Fruit tree

If you decorate your coffee topiary with dried citrus slices or decorative mini-fruits, you get an accessory for summer serving. However, even in the cold season, it will be appropriate in the interior of the kitchen or dining room.

By the way, the coffee ball itself can turn into an appetizing fruit as in the photo below.

Idea 4. Tree with butterflies and birds

Another idea for a spring-summer coffee topiary is a tree with butterflies, dragonflies or birds sitting on it.

Idea 5. Christmas tree

A Christmas tree-shaped coffee tree is a great decoration for or New Year's home decoration. You can buy a blank or do it yourself by rolling thick paper into a cone and cutting off the excess.

Idea 6. Topiary "Money tree"

The coffee tree can be a great gift for men. It is done in the same way as a regular topiary, the only difference is that first coins are glued to the ball, then they are bent around with an open lightning, and only then the ball is covered with coffee beans.

Idea 7. Coffee Valentine

Topiary in the shape of a heart is a great gift for Valentine's Day and more. You can buy the heart base ready-made in a florist store or make it yourself from scrap materials.

How to make a heart-shaped coffee topiary with your own hands can be found in the following video.

Idea 8. "Floating cup"

This topiary is often referred to as a "spill cup" or "flying cup". Despite the seeming complexity, it is very simple to do. To make the base of the spill cup, wire and hot glue or polyurethane foam are used. After watching the following video instruction, you will learn and clearly see how to make such a topiary with your own hands.

Idea 9. Double or triple topiary

Double and triple topiary requires more effort, but the result is more impressive. Crowns can branch out from one trunk or immediately "grow" from three trunks of different heights and thicknesses.

Idea 10. Decorative balls

Strictly speaking, such a decoration cannot be called a topiary, because it does not have a trunk and does not at all look like a tree. And yet, it looks just as beautiful, especially when combined with balls of beans, lentils and pumpkin seeds. The arrangement of balls looks beautiful on a large dish or in a transparent glass vase, and you can decorate with it not only a dining table, but also a coffee table, a console in the hallway or a shelving unit in the living room. In the next photo slider, you can get some ideas for combining bean balls and coffee beans.

Master class for beginners

Most types of topiary are made according to the same principle. Having mastered our basic instructions, you can create a topiary to your taste.

Materials and tools:

1. To create a crown:

• Coffee beans of one type or several (200-300 g depending on the size of the ball).
• A base ball made of polystyrene (sold in art stores), floral foam (can be found in a florist store) or plastic (ball for a children's dry pool) with a diameter of about 8-12 cm.If you want, instead of a ball, you can use a blank in the form of a heart or any other shape.
• Decor (optional): cinnamon sticks, dried citrus slices, carnation stars, artificial flowers, satin ribbons, beads, etc.
• Brown acrylic paint or a piece of brown cloth that can be used to wrap a ball.

1. For the trunk:

• Branch, pencil or stick. You can determine the desired length using a simple formula: the height of the pot + 1/3 of the diameter of the ball + the desired distance from the base to the crown.
• Decor (if needed): Paint, twine, satin ribbon, or other material that can be used to wrap or paint the barrel.

1. For the foundation:

• Pot, cup, or any other pretty container;
• Assembly mixture: cement, plaster or alabaster. We recommend using alabaster, as it is easy to breed, it is accessible, and most importantly it dries quickly and does not crack.
• Materials for decoration and filling the pot. It can be the same coffee beans, small pebbles, or even better - dry moss.

1. Auxiliary tools and materials:

• Hot glue gun and about three sticks of glue or Titan transparent assembly glue.
• Scissors.
• Brush.

Instructions:

Step 1. First you need to start preparing the ball. Paint it brown and leave to dry. At this stage, you can paint the trunk and / or pot.

Step 2. While the paint is drying, sort the beans. This step is optional, but desirable if you want the crown to be neat and even. First, remove any broken or cracked kernels. Divide the rest into 4 groups:

• Beautiful grains of the same size - they will be on the most visible part of the topiary, that is, at its top.
• Round - it is better not to use them for finishing the crown, since on the ball they will be higher than the main mass. If desired, they can be used to decorate the pot.
• Whole, but not very pretty - they are best used to decorate the lower part of the crown.
• Small - they are good for covering small gaps between the grains.

Step 3. Now that the ball is completely dry, you can cut a hole in it for the barrel. To do this, first attach the barrel to the ball and circle its outline, then cut a hole in it 2-3 cm deep.

Step 4. We proceed to the design of the crown. You can use one of two techniques:

• Technique 1. The grains are glued one by one and most often according to the principle of a honeycomb. You can also glue them with a groove up and / or down, vertically, horizontally or on an edge, alternate light and dark beans, if necessary, insert small / large grains or halves into the gaps. Do not forget that the most beautiful grains should be glued on the top half of the ball. Below is a selection of photos of coffee topiary, the grains of which are stacked in different ways (scroll through!).

• Technique 2. To apply this technique, it is better to use not hot glue, but transparent titanium assembly glue. Squeeze some glue straight from the tube onto a ball and let it spread over a small area (eg, 5 × 5 cm). Then sprinkle this sector with handfuls of grains and begin to distribute and align the grains over the ball with your fingers. To prevent excess coffee from falling on the floor, place a container under your arms. Glue "Titan", unlike hot glue, will allow you to move and compact the grains on the ball without fear of scalding. And, besides, it gives more time for correction. Therefore, using it, you can not glue the beans one by one, but sprinkle the ball with whole handfuls of coffee, which significantly speeds up the process. True, the grains in this case will be stacked randomly, and not in a certain order.

Whichever technique you choose, when the ball is almost completely covered with grains, leave a small area around the hole unformed. We will finalize it later, when the barrel is installed.

Step 5. If you want not just to paint the barrel, but to decorate it with twine or satin ribbon, now is the time to do it.

• To wrap the barrel with satin ribbon, it must first be wrapped in double-sided tape, not reaching the edges about 3 cm.
• The twine can also be fixed with double-sided tape or hot glue / titanium glue.

Step 6. Insert the barrel into the ball and fix it with hot glue. Keep in mind that the glue melts the styrofoam quickly, so insert small pieces of paper along with the glue to keep the hole from getting too deep. Remember that the barrel should fit into the ball about 1/3 of its diameter.

Step 7. Now you can glue the grains in the area around the trunk. If desired, in order for the crown of the coffee tree to have no gaps at all, you can glue the second layer of beans onto the ball. Often, a two-layer crown is covered first with grains with grooves down (you can use poor quality grains), and then with grooves up.

Step 8. Hooray, the coffee topiary is almost ready! It remains only to "plant" the tree in a pot. To do this, first make sure there is no drainage hole in the pot. If there is a hole, fill it with hot glue. Next, dilute the cement or alabaster and immediately fill the container with the mixture, not reaching the edges by 2-3 cm. Insert the tree into the center of the pot and hold for a few minutes until the mixture hardens. Then leave the topiary for 12-24 hours, that is, until the "soil" is dry.

• As already noted, a mixture of alabaster is best suited for making topiary with your own hands. It is diluted as follows: water is poured into the pot, not reaching 2-3 cm to the edge, then the water is poured into a bowl, then alabaster is gradually poured into the water. The mixture must be stirred continuously until the consistency of thick sour cream is obtained.

Step 9. When the base of the topiary is dry, start decorating it. Alabaster can be decorated with the same coffee as in our master class, covered with dry moss, sisal, filled with pebbles, glass stones or beans. Finally, add the finishing touch with a satin ribbon bow.

Also, we suggest watching a video master class on making topiary from a plastic ball for a dry pool.